HS Gray Epoxy Primer

​

 

P9.3.K1 is a 2K, VOC compliant, high build, anti sag epoxy primer with built in corrosion resistance and excellent adhesion onto properly prepared hot or cold roll steel, aluminum and many other non-ferrous metals, fiberglass and over properly prepared 2K painted surfaces.

 

Suggested Use

As a wet on wet sealer or a full bodied sand-able primer. Over any of the above mentioned properly prepared substrates where:

• High level of corrosion resistance is needed.

• Excellent adhesion is needed.

• High productivity is required.

• VOC restrictions are present.

• Excellent performance when applied with airless, air-assist airless pressure pot, cup gun or brush or rolled.

​

Field Applications

• Semi-trucks

• Structural steel

• Coachworks (Buses)

• Work panel trucks

• Trailers and frames

• Construction equipment

• Cement trucks and snow plows

• Many OEM applications

• Oil Field Equipment

• Aircraft and marine

 

Components

P9.3.K1 Base

GSR-F, GSR-M, GSR-S Fast, Medium, Slow Reducer for National Rule Applications

GS0R-F, GS0R-M, GS0R-S Fast, Medium, Slow Zero VOC Reducer for Compliant Applications

EH.001 Hardener

​

Mixing Ratio

Mix: One (1) part P9.3.K1 Epoxy Base to one (1) part EH.001 Epoxy

Hardener. Reduce 0%-25% with selected reducer.

 

Regulatory Information

​

• % Solids By WT:                66.2

• Spec. Gravity:                    1.285

• LBS Per Gal:                      10.723

• Coating VOC g/l:                210.7

• Coating VOC lbs/gal:         1.75

• Material VOC g/l:                134.2

• Material VOC lbs/gal:         1.12