High Gloss UHS Low VOC Polyurethane

​

L6.1.K1 is a 2K High Solids High Gloss Low VOC Anti-Sag Urethane Topcoat. L6.1.K1 is compliant in all restricted VOC areas.

Suggested Uses

As a high performance topcoat over suitable primers or over properly prepared substrates, including: Hot and Cold roll steel, Galvanized Steel, Aluminum, fiberglass, plastics and wood

where:

• Outstanding Gloss and color retention are desired.

• Outstanding adhesion and flexibility is required.

• Excellent chemical resistance is required.

• Low VOC coatings are mandated.

• Excellent anti-sag qualities for easy application around hard to get to areas.

• Excellent performance when using air-assist airless, pressure pot, cup gun

• Can be used for roller or brush application.

Field Applications

• Heavy industrial equipment

• Oil Field equipment

• Construction equipment

• Aircraft and Marine (above the water line)

• Airport ground support equipment

• Truck and Trailer Refinishing

• Equipment, Truck, Trailer OEM finishing.

• With special attention to preparation L6.1.K1 and be used DTM on ferrous substrates.

Components

L6.1. K1 Base

GS0R-F, GS0R-M, GS0R-S Fast, Medium, Slow Urethane Reducer (VOC compliance)

AV.002 Hardener (VOC compliance)

Mixing Ratio

Mix: Mix three (3) parts base color to one (1) part hardener.

Reduce up to 15% - 33% with selected suitable reducer.

 

Regulatory Information

​

• % Solids By WT:             41.20

• Spec. Gravity:                 1.12

• LBS Per Gal:                   9.39

• Coating VOC g/l:            273.39

• Coating VOC lbs/gal:     2.28

• Material VOC g/l:            161.12

• Material VOC lbs/gal:     1.34