High Gloss UHS Low VOC Polyurethane *For Airless Application*

​

L10.1.K1 is a 2K High Solids High Gloss Low VOC Anti-Sag Urethane Topcoat.

Suggested Uses

As a high performance topcoat over suitable primers or over properly prepared substrates, including: Hot and Cold roll steel, Galvanized Steel, Aluminum, fiberglass, plastics and wood

where:

• Outstanding Gloss and color retention are desired.

• Outstanding adhesion and flexibility is required.

• Excellent chemical resistance is required.

• Low VOC coatings are mandated.

• Excellent anti-sag qualities for easy application around hard to get to areas.

• Excellent performance when using air-assist airless, pressure pot, cup gun.

• Can be used with roller or brush application.

Field Applications

• Heavy industrial equipment

• Oil Field equipment

• Construction equipment

• Aircraft and Marine (above the water line)

• Airport ground support equipment

• Truck and Trailer Refinishing

• Equipment, Truck, Trailer OEM finishing.

Components

L10.1.K1 Base

GSR-F, GSR-M, GSR-S Fast, Medium Slow, Urethane Reducer (National Rule)

GS0R-F, GS0R-M, GS0R-S Fast, Medium, Slow, Urethane Reducer (VOC compliance)

AH.002 Hardener (National Rule)

AV.002 Hardener (VOC compliance)

Mixing Ratio

Mix: Mix three (3) parts base color to one (1) part hardener.

Reduce 10% with airless, 15%-20% with air assist airless and pressure pot, 33% with cup gun using selected suitable reducer.

​

Regulatory Information

​

• % Solids By WT:                48.29

• Spec. Gravity:                    1.11

• LBS Per Gal:                      9.268

• Coating VOC g/l:               219.28

• Coating VOC lbs/gal:        1.83

• Material VOC g/l:               201.37

• Material VOC lbs/gal:        1.68